All Things Astro
You have %itemCount% in your cart. Total being %total%
The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH300 allows you to install ESATTO 3.5" LP focuser to Veloce RH300 telescopes by Officina Stellare. Optical thickness 9mm.
The adapter ESATTO 3.5" LP for OfficinaStellare Veloce RH200 allows you to install ESATTO 3.5" LP focuser to Veloce RH200 telescopes by Officina Stellare. Optical thickness of this adapter is 9mm. Since RH200 optimal backfocus...
If you are searching for the most precise but low profile robotic focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you...
Adapter ESATTO 3.5" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 3.5" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...
By adding this adapter, you can connect the ESATTO 3.5" LP low profile robotic focuser directly onto the back of SC telescopes. Optical thickness of this adapter is just 10mm.
If you want to connect a camera with a 3" nosepiece to your ESATTO 3.5" LP, just connect the 3" visual back to the M98 thread of ESATTO 3.5" LP. This adapter has an internal...
Adapter from M98 to M68 with stop ring for ESATTO 3.5" LP allows you to connect any camera or accessory with M68 female thread. Just thread this adapter to the M98 thread of the ESATTO...
When installing ESATTO 3" in a telescope with a long travel focuser (such as those usually found on refractors), it is necessary to take into account the lower travel of ESATTO 3" since it's a...
The M81 25mm extension tube can be directly threaded to the ESATTO 3" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M81 extension tube has 25mm...
Adapter ESATTO 3" for Meade 16" with 4" thread allows you to connect ESATTO 3" to Meade LX200 SCT, LX200 GPS, LX200-ACF, LX600-ACF, LX800-ACF, LX850-ACF 16 inches telescopes or to all the telescopes that have...
Adapter ESATTO 3" for SkyWatcher ESPRIT 120 ED and 150 ED. Specifications
Adapter ESATTO 3" for SkyWatcher ESPRIT 100 ED.
Adapter ESATTO 3" for Borg 90FL and 107FL f/3.9 is composed by 2 rings, one to connect the microfocuser to the carbon fiber optical tube and another one to insert the Borg reducer/flattener in the...
Adapter ESATTO 3" for Takahashi TSA120
Thanks to its low profile, the ESATTO 3" is the perfect motorized focuser for Takahashi telescopes with M72 thread. By adding the M72 adapter, you can thread the ESATTO 3" focuser directly onto the back...
If you are searching for the most precise motorized focuser for Takahashi FSQ85, this adapter allows you to connect ESATTO 3" to this telescope. By adding the M81 to M72 adapter with stop ring you...
If you are searching for the most precise motorized focuser to use the GSO/Orion/TPO Ritchey-Chretien 10, 12, 14 and 16 inches (both aluminum and carbon tubes) for astrophotography, this adapter allows you to connect ESATTO...
If you want to connect a camera with a 3" nosepiece to your ESATTO 3" or ARCO 3", just connect the 3" visual back to the M81 thread of ESATTO 3" or ARCO 3" ....
If you want to use your telescope visually with ESATTO 3" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 3" to the M81...
There are 2 different M81 adapters (to Female) available for ESATTO 3" and ARCO 3". Adapter from M81 to M68 Female - Allows you to connect any camera or accessory with M68 male thread Adapter...
There are 7 different M81 adapters available for ESATTO 3" and ARCO 3". Adapter from M81 to T2 - Allows you to connect any camera or accessory with T2 (M42x0.75) female thread Adapter from M81...
ARCO 2" connected to ESATTO 2" LP thanks to the optional Adapter ESATTO 2" LP for ARCO 2" PL3600538: free aperture after ARCO 2" is 50.9mm.
There are 3 different M60 adapters available for ESATTO 2" Low Profile. Adapter from M60 to T2 - Allows you to connect any camera or accessory with T2 (M42x0.75) female thread Adapter from M60 to M48...
If you want to connect a camera with a 2" nosepiece to your ESATTO 2" LP, just connect the 2" visual back to the M60 thread of ESATTO 2" LP. This adapter has an internal...
Adapter ESATTO 2" LP for telescopes with large 3.3" SC thread allows you to connect the ESATTO 2" LP to Celestron SCT (11" and 14") and EdgeHD (925, 1100, and 1400) models. Since the ESATTO...
By adding this adapter, you can connect the ESATTO 2" LP low profile robotic focuser directly onto the back of SC telescopes. This adapter threads directly to the back SC thread of EdgeHD 8" and...
The M56 15mm extension tube can be directly threaded to the ESATTO 2" draw tube and allows you to fix camera and accessories further away from the ESATTO microfocuser. This M56 extension tube has 15mm...
If you are searching for the most precise motorized focuser for Takahashi FS-60Q, this adapter allows you to connect ESATTO 2" to this telescope. Based on the camera and accessories train you want to connect,...
The Borg reducer (7880) has to be connected after the rotator. In the picture below you can see how to connect the Borg 55FL lens. PLUS 80mm support rings are not included with this kit....
Specifications Dimensions of the adapter ESATTO 2" for SkyWatcher/Orion ED80, ED100 and ED120. Optical thickness is 40mm.
ESATTO 2" focuser installed on SkyWatcher Newton 250mm telescope instead of the original focuser. Specifications Dimensions of the adapter ESATTO 2" for SkyWatcher/Orion Newton 250 f/4 and f/5. Optical thickness is 3.5mm.
ESATTO 2" focuser installed on SkyWatcher Newton 200mm telescope instead of the original focuser. Specifications Dimensions of the adapter ESATTO 2" for SkyWatcher/Orion Newton 200 f/4 and f/5. Optical thickness is 3.5mm.
ESATTO is the perfect microfocuser for SC and Aplanatic Schmidt-Cassegrain telescopes (like the Celestron EdgeHD). By adding this adapter, you can connect it to the large 3.3" thread in the back of the Celestron SCT...
Thanks to the adapter ESATTO 2" for telescopes with SC thread you can connect the ESATTO 2" to SC telescopes like the Celestron, C6, C8, C9.25 and EdgeHD800. In the picture below, Celestron C9.25 telescope...
If you want to use your telescope visually with ESATTO 2" or if you want to connect a camera with a 2" nosepiece, just connect the 2" visual back for ESATTO 2" to M56 thread...
There are 5 different M56 adapters available for ESATTO 2" and ARCO 2". Adapter from M56 to T2 - Allows you to connect any camera or accessory with T2 (M42x0.75) female thread Adapter from M56...
ESATTO 4" is the larger robotic focuser in the ESATTO family and, thanks to the large 102.2mm free aperture and high 10kg payload capacity, it's perfect for large professional telescopes usually found in observatories or...
Searching for the best low profile motorized focuser with high payload capacity and large free aperture? The ESATTO 3.5" LP is the solution for all telescopes that, like astrographs, have low backfocus! The ESATTO 3.5"...
ESATTO 3" is the robotic focuser perfect for many telescopes like large refractors, Ritchey-Chretiens o Cassegrains! ESATTO is specifically designed for astrophotography but, thanks to specific technologies developed by PrimaLuceLab, it also has the Virtual...
If you're searching for the best low profile focuser for your Celestron EdgeHD 8" or another telescope with low backfocus available, ESATTO 2" LP is the solution! ESATTO 2" LP comes with all the most...
Wanting to change your stock focuser because it isn’t sturdy enough and lacks precision? Do you want to improve the internal focuser of your SCT telescope? ESATTO is the next generation robotic focuser for telescopes,...
This temperature sensor is compatible both with ECCO, the environmental computerized controller for EAGLE, and with SESTO SENSO and ESATTO, the robotic focusing solutions for telescopes. When used with ECCO, this temperature sensor allow it...
These 26mm/33mm/37mm adapters allow you to install SESTO SENSO 2 on focusers that come with a 26mm/33mm/37mm diameter shafts. Out of the box, SESTO SENSO 2 connects to focusers that come with a 25mm diameter...
Based on the success of the previous generation motor PrimaLuceLab introduced in 2017, SESTO SENSO 2 adds even more great new features. SESTO SENSO 2 incorporates into a single enclosure (87.5 x 64 x 43mm)...
We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of the instrument they are designed for. On the other side...
These Eagle-compatible power cables feature on one side the false battery that plugs into the DSLR in place of the standard battery. On the other hand they have the plug with screw connection to prevent...
The EAGLE control unit can directly power supply FLI camera. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of...
The EAGLE control unit can directly power supply Astro-Physics mounts. We build appropriate 12V power supply cables with various lengths. The EAGLE-compatible power cables have on a side the jack (for 12V power supply) of...